Application Views Adtran IQ Probe Configuration Application (AdIQProbConApp)
Device Management Page 58 Adtran DSU/CSU
DTE Port Configuration View
Access: From the Icon Subviews menu for the
AdIQProbConApp icon, select DTE Port Configuration.
This view displays the following information.
Physical Layer Configuration
Interface Type
Interface type for the DTE interface. Possible
types are x21, v35, eia530, and eia232.
CTS Option
Selects the Clear to Send (CTS) option. Options
are forcedOn and followRTS.
CD Option
The Carrier Detect (CD) option. Options are
normal and forcedOn.
DSR Option
The Data Set Ready (DSR) option. Options are
normal and forcedOn.
Transmit Clock Phase
Sets the phase of the DTE Transmit clock. Either
normal or inverted.
Flow Control
Determines how the IQ device will respond to
congestion during DBU operation. If set for none,
the IQ will drop frames during DBU operation
when severe congestion occurs. If set for
hardware, the IQ will vary the DTE TC clock in
order to control the amount of data offered to the
IQ when severe congestion occurs. fECNBECN
mode will set the FECN bit in outbound frames
and set BECN bit for inbound frames leaving flow
control up to the DTE devices.
Frame Relay Layer Configuration
Port Management DLCI
Selects the DTE Port Management DLCI. (Range
16 - 1007).
Management PVC
Controls the presence of the DTE management
PVC in a full status response to the DTE device.
Timeout, T392
Sets the timeout in seconds between polling
intervals. (Range 5 - 30).
Error Events, N392
Sets the number of error events for the frame
relay management. (Range 1 - 10)
Error Window, N393
Sets the error window (polling events) for the
frame relay management.
Comentários a estes Manuais