ADTRAN ATLAS 800PLUS Manual do Utilizador descarregar pdf (Página 145)

Chapter 11. Updating Firmware

61200226L1-1 ATLAS 800

PLUS

User Manual 11-5

When the update process has successfully completed,

Idle

displays in

Cur-

rent Update Status

, and

Module Update Complete

displays in

Update Status

. Either the module restarts immediately and resumes oper-

ation, or it restarts at the specified time and day of the week—depending on

your selection.

If an error occurred during the update process,

Previous Update Status

displays the appropriate error message. In this case, return to step 3 and at-

tempt the update process again. If the same error occurs, contact ADTRAN

Technical Support.

View

Current Update Status

to verify the progress of the current

firmware update or any errors encountered during the download

process (see

Current Update Status

on page 6-15).

Select

Begin Firmware Update

to start the update process. Enter

to confirm the transfer and to set up the module to receive the

TFTP upload.

During the TFTP upload process, various status messages

display in

Current Update Status

to indicate progress.

Table 11-1 describes these messages.

To update additional modules, begin at step 3 and repeat this

process.

Table 11-1. TFTP Upload Messages

Message Meaning

Contacting

Server

Indicates communication with the TFTP network

server is trying to be established with the specified

server address in the TFTP Server IP Address

field.

Beginning TFTP

Transfer

Indicates communication with the TFTP network

server has been established and the update file is

being transferred between ATLAS and the TFTP

network server.

Completed

Indicates the ATLAS product successfully received

the update file.

Error: File Not

Found

Indicates the TFTP network server was unable to

locate the specified file name or path in the TFTP

Server Filename field.

Error: Access

Violation

Indicates the TFTP network server denied ATLAS

access to the given update file name and path.

Please verify appropriate user rights are selected

for the specified path.

Instructions for Updating Firmware Using TFTP (Continued)

Step Action

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 209 210

Comentários a estes Manuais

Sem comentários

ADTRAN ATLAS 800PLUS Manual do Utilizador Página 145

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ADTRAN ATLAS 800PLUS