ADTRAN BlueSecure Controller Guia de Instalação descarregar pdf (Página 16)

BlueSecure™ Access Point 1800 Installation Guide

VII. Connecting and Powering the BSAP

Follow these instructions to connect your BlueSecure BSAP to your Bluesocket WLAN and then

power it up:

1. Make a note of the 12-character MAC address and the serial number listed on the back of

the BSAP-1800 before mounting the BSAP to a wall or other surface. You will need this

information during configuration.

2. Position the BSAP-1800 for best radio performance.

The BSAP-1800 should be place where it has the best unobstructed view of the coverage

area. If possible, mounting the BSAP-1800 on the ceiling will provide the best performance

in a typical office environment. For more information, please refer to Bluesocket’s web site.

3. The BSAP derives its operating power directly from the RJ-45 connector when connected to

a device that provides IEEE 802.3af compliant Power over Ethernet (PoE).

Caution: If the BSAP is used in a medical environment, it must use an IEC/EN60601-1

compliant power adapter. See

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Sem comentários

ADTRAN BlueSecure Controller Guia de Instalação Página 16