ADTRAN NetVanta 160 Manual do Utilizador descarregar pdf (Página 24)

Table 2. Radio Default Settings

Parameter

802.11b/g/n Radio

Defaults

802.11a/n Radio Defaults

Inactivity Timeout Max 5 5

Fragment Threshold Length 2346 2346

Beacon Period 200 200

RTS Threshold 2346 2346

Local Power Level Full Full

Antenna MIMO 2 x 2 MIMO 2 x 2

NetVanta 160 Series Wireless Configuration Guide Configuring AOS AP Virtual Access Points

When radio configuration is complete, select the Apply button at the bottom of the menu to apply the

settings to the AC. To apply the changes to the AP, follow the instructions in Applying the Settings on page

20.

Configuring AOS AP Virtual Access Points

A VAP is a logical representation of a wireless network. VAPs are distinguished by an SSID and can be

mapped to a VLAN. VLAN information can be shared across switches with Ethernet trunks. An AOS AP

can terminate Ethernet trunks and associate a VAP with a VLAN. A common example of this is having two

VAPs, one associated to a corporate VLAN and one associated to a guest VLAN.

To configure a VAP, select Data > Wireless > APs/Radios/VAPs > Virtual Access Point tab. Each radio

will have a default VAP configured. The VAP name is based on the interface to which the AP and radio are

mapped (dot11ap <ap/radio.vap>,where <ap> is the AP interface number, <radio> is the radio interface

number, and <.vap> is the VAP interface number). To add a VAP, select the appropriate AP, Radio

interface, and VAP interface numbers, and then select Add/Modify.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Sem comentários

ADTRAN NetVanta 160 Manual do Utilizador Página 24