ADTRAN AOS Version R10.1.0 Guia de Resolução de Problemas descarregar pdf (Página 36)

Example Configurations

The following configuration applies to Example 1:

interface eth 0/1

ip address 192.168.1.1 255.255.255.0

no shutdown

interface t1 1/1

clock source line

tdm-group 1 timeslots 1-24 speed 64

no shutdown

interface ppp 1

ip address 172.16.1.1 255.255.255.252

no shutdown

cross-connect 1 t1 1/1 1 ppp 1

router /jointfilesconvert/366217/bgp 201

no auto-summary

no synchronization

network 192.168.1.0 mask 255.255.255.0

neighbor 172.16.1.2

no default-originate

soft-reconfiguration inbound

remote-as 200

ip route 0.0.0.0 0.0.0.0 192.168.1.254

Depending on the provisioning from the MPLS provider, a default route for Internet access

can be advertised through BGP.

When the eth 0/1 interface is up, there will be a directly connected route for the

192.168.1.0 /24 subnet in the routing table. The route will allow this network to be

advertised in BGP using the network command. When the interface is not up, the route will

not be advertised in BGP because it is not in the routing table of the router.

The command clock source line is enabled by default. Therefore, this command will not

appear in the output when the show running-config command is issued.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Sem comentários

ADTRAN AOS Version R10.1.0 Guia de Resolução de Problemas Página 36