ADTRAN 850 Manual do Utilizador descarregar pdf (Página 29)

61200375L1-1

TA 850

TA 850 SDSL RCU UIG/61200377L1-31A

Page 29 of 76

IP Map/Active

When this is set to Yes (def), the TA 850 will attempt to transport IP packets for this DLCI. A setting of

No means that no IP traffic or route will be exchanged.

IP Map/IARP

When this is set to Yes (def), the TA 850 will send Inverse ARP packets to determine the IP address on

the other end of the virtual circuit. If the IARP is responded to, a route is placed in the IP route table. A

setting of No means that the route address is to be assigned statically using the IP M

-E

DDRESS

parameter. The TA 850 will always respond to Inverse ARP requests.

IP Map/Far-End IP Address

This is the IP address of the device on the other end of the virtual circuit. When this DLCI becomes

active, the TA 850 will add a route in the IP routing table.

IP Map/IP Netmask

The IP network mask to apply to the F

-E

IP A

DDRESS

and L

INK

IP A

DDRESS

is specified here.

IP Map/Local IP Address

The virtual circuit may require an IP address to be specified at this DLCI interface. This is called a

numbered interface. This address is used by theTA 850 to respond to Inverse ARP requests. If this IP

address is left as 0.0.0.0, the link is treated as unnumbered and the TA 850 responds to the Inverse ARP

with its Ethernet IP address.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 75 76

Sem comentários

ADTRAN 850 Manual do Utilizador Página 29