ADTRAN 850 Manual do Utilizador Página 31

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 76
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 30
61200375L1-1
TA 850
TA 850 SDSL RCU UIG/61200377L1-31A
Page 31 of 76
© 2001, ADTRAN, Inc. TA 850 User Manual
to respond to Inverse ARP requests. If this IPX address is left as 0, the link is treated as unnumbered
and the TA 850 responds to the Inverse ARP with its Ethernet IPX address.
DLCI Mapping/Bridge Map
This menu is used to permit bridging of packets over this DLCI. Each DLCI or virtual circuit must be
assigned a bridge group. The bridge group treats all virtual circuits as one circuit. Bridge packets des-
tined to be transmitted out a particular bridge group are copied and transmitted individually out each
DLCI in the bridge group. However, incoming bridge packets received from one DLCI are not retrans-
mitted out the other DLCIs in the same bridge group. Any device in the bridge group must transmit to
each DLCI. This requires a fully meshed circuit, meaning each device has a virtual circuit to each other.
Bridge Map/Active
When this is set to Yes, the TA 850 will bridge packets to and from this DLCI. Bridge packets are any
packets that are not IP or IPX packets except when the router is turned off, in which case that particular
routers protocol packets are bridged. A setting of No (def) means that no bridging will occur.
Bridge Map/Bridge Group
The bridge group that this DLCI is part of is specified here as Group 1 (def) or Group 2.These
groups correspond to the spanning tree protocols Bridge Group 1 and Bridge Group 2.
DLCI Mapping/Filter
The TA 850 can block packets in and out of a PVC port by use of the filters. They are set up in two
steps: 1) define the types of packets that would be of interest in the C
ONFIGURATION
/S
ECURITY
/F
ILTER
D
EFINES
menu, and 2) set up the filter type and combination of defines that will cause a packet block.
Filter/In from PVC
The packets which come into the TA 850 via this PVC can be filtered in three ways:
D
ISABLED
(
DEF
)
Turns off packet input filtering. No incoming packets
from this PVC are blocked.
B
LOCK
A
LL
All incoming packets from this PVC are blocked ex-
cept as defined in the F
ILTERS
/I
N
E
XCEPTIONS
list.
F
ORWARD
A
LL
All incoming packets from this PVC are not blocked
except as defined in the F
ILTERS
/I
N
E
XCEPTIONS
list.
Vista de página 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Comentários a estes Manuais

Sem comentários