ADTRAN 1204006L1 Manual do Utilizador descarregar pdf (Página 73)

61200.175L1-1 FSU 5622 ESP User Manual 57

Chapter 6. DTE Port Configuration

Poll/Response Timeout (TIMEOUT)

Set the amount of time the FSU 5622 ESP waits for a poll re-

sponse before issuing another poll.

Minimum Poll Timer (MIN POLL TIME)

This parameter defines the minimum time (ms) between con-

secutive polls to a given PU assigned to the DTE port.

Slow Poll Ratio (POLL RAT)

Determine how often devices on the Slow Poll list are polled.

This list is automatically managed based on poll timeouts.

Initially, all PUs are on the Normal list. When a PU times out a

fixed number of times, it is moved to the Slow Poll list. A PU

remains on this list until it responds properly to a poll.

The number entered is the number of times PUs on the Normal

list are polled before PUs on the Slow Poll list are polled. Enter 1

to disable this option.

Disconnect Threshold (THRESHOLD)

Set the maximum number of response timeouts allowed before a

session is terminated.

Transmit Delay (TX DELAY)

Set the minimum time between transmission frames.

CTS Option

Set the FSU 5622 ESP CTS option to follow RTS or to be forced

on.

Protocol Address Table

PU Address (PU ADDRESS)

Enter the physical unit address of each SDLC device you wish to

connect to the FSU 5622 ESP.

Group Address

Enter the address used for group polling. With this address the

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 174 175

Sem comentários

ADTRAN 1204006L1 Manual do Utilizador Página 73