ADTRAN TA 544 Manual de Instruções Página 123

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 162
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 122
Total Access 544R System Manual Section 5 DLP-8
61200704L2-1B © 2003 ADTRAN, Inc. 123
Prior to the start of the upgrade, the transfer status will display IDLE. During the TFTP upload, various
status messages display in T
RANSFER STATUS to indicate progress. The following table describes
these messages.
9. When the update has successfully completed, FLASH PROGRAMMED SUCCESSFULLY will display briefly
in the T
RANSFER STATUS field. This will be followed by a LOADED CODE VER X.X.X CHKSUM = XXXX
message. Finally the T
RANSFER STATUS field will display RESETTING...
The unit will restart immediately and resume operation. After giving the unit sufficient time to reboot,
the user may Telnet back into the unit and log in.
For WAN Upgrades
1. Telnet into the unit using FULL or SUPPORT levels (refer to DLP-3, Adding/Removing Telnet Users and
Changing Password Security Levels).
2. Verify the TFTP server is running on the network.
Verify that the unit can ping the TFTP server.
3. Go to the S
YSTEM UTILITY menu and select the UPDATE FIRMWARE menu; press <Enter>.
4. Go to the T
RANSFER METHOD menu and select TFTP.
5. Set the TFTP S
ERVER ADDRESS to the IP address of the machine running the TFTP server program.
6. Enter the filename of the update file into the TFTP S
ERVER FILENAME field.
7. Select S
TART TRANSFER to start the update. Enter Y to confirm the upgrade.
Message Meaning
TRANSFERRING... [X
KB]
Indicates communication with the TFTP network server has been
established and the update file is being transferred between the unit and
the TFTP network server.
FLASH
PROGRAMMED
SUCCESSFULLY
The unit has been upgraded successfully.
LOADED CODE
VER X.X.X
CHKSUM = XXXX
Unit displays the version and checksum of the upgraded code.
RESETTING.... Unit is power cycling.
RECV ERROR Unit will display this message if server filename is incorrect.
HOST TIMEOUT Unit will display this message if TFTP server address is incorrect.
IDLE The upgrade has not yet been initiated.
If using ADTRAN utilities, this will be the IP address that appears in the TFTP SERVER
S
TATUS window.
Vista de página 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 161 162

Comentários a estes Manuais

Sem comentários