ADTRAN TA 544 Manual de Instruções descarregar pdf (Página 125)

DLP-9 Saving the Current Configuration Using TFTP

Introduction

The unit supports configuration transfers from the unit (via the 10/100BASET Ethernet port) to a TFTP

server located on the network or a TFTP server accessible across the WAN. This DLP provides the steps to

follow for a successful configuration transfer using the

10/100BASET Ethernet port and a TFTP Server.

Tools and Materials Required

• A PC with a Telnet client software

• A TFTP Server accessible on the local network (a TFTP server is provided with the unit as part of the

ADTRAN Utilities software) or a TFTP server accessible across the WAN.

• VT100 compatible terminal or computer with terminal emulation software

• Appropriate cable to connect terminal to the unit (customer-provided)

• DB-9 female to RJ-45 female adapter for connecting to the CRAFT port on the rear of the unit. This

adapter is ADTRAN-proprietary and is shipped with the unit.

• Ethernet cable from the 10/100BASET port on the unit to a hub (customer-provided)

• Use Ethernet crossover if going from the unit to a PC (customer-provided).

To prevent electrical shock, do not install equipment in a wet location or during a

lightning storm.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 161 162

Sem comentários

ADTRAN TA 544 Manual de Instruções Página 125