ADTRAN TA 544 Manual de Instruções descarregar pdf (Página 91)

Total Access 544R System Manual Section 4 SHDSL RCU ATM User Interface Guide

IP Routing

Step Action

From the Total Access 544R main menu, select the L2 PROTOCOL >

NTERFACES menu. Set up the ATM network here.

2. Select the ATM CONFIG menu located under the main CONFIG field.

3. Enter the IDLE CELLS format for your network.

4. Set DATA SCRAMBLING appropriately for your network.

Back all the way out to the top level Total Access 544R menu, and then

select the R

OUTER menu.

From the CONFIG menu, you will set up addresses for your LAN and

WAN.

For basic IP routing, use all the default values.

Select the INTERFACE > SETUP menu, enter the IP menu to enter your

LAN configuration under P

RIMARY IP.

Enter your LAN IP ADDRESS and SUBNET MASK information.

For this example, the IP ADDRESS is 192.168.1.2, the SUBNET MASK is

255.255.255.0. Enter the Default Gateway under R

OUTER > CONFIG >

OUTES.

Arrow back to the main menu, and select the L2 Protocol Interfaces

menu and then the Config > PCV Config menu. Enter your data PVC

information here.

10.

Create a new PVC by entering the menu and press <i> under NUM

field. Enter your VPI and VCI values.

11.

From the Main Router > Config > Interfaces (SHDSL) > Setup menu,

enter your LAN information.

For this example, the FAR END IP ADDRESS is 10.25.4.9, the IP

ETMASK is 255.255.255.252, and the LOCAL IP ADDRESS is 10.25.4.10.

12.

Arrow back to the top level Total Access 544R menu to activate your

changes.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 161 162

Sem comentários

ADTRAN TA 544 Manual de Instruções Página 91