ADTRAN Stub Routing Especificações Página 217

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 568
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 216
Command Reference Guide Global Configuration Mode Command Set
61950860L1-35D © 2003 ADTRAN, Inc. 217
line [ console | telnet ] <line-number> <ending number>
Use the line command to enter the line configuration command set for the specified console or telnet
session. This command can be used to add a route to the default gateway by entering ip route 0.0.0.0
0.0.0.0 and specifying the interface or IP address. See the sections Line (Console) Interface Config
Command Set on page 516 and Line (Telnet) Interface Config Command Set on page 526 for information
on the subcommands found in these command sets.
Syntax Description
console
Specifies the DB-9 (female)
CONSOLE
port located on the rear panel of the
unit.
See the sections Line (Console) Interface Config Command Set on
page 516 for information on the subcommands found in this command set.
telnet
Specifies a Telnet session(s) to configure for remote access .
See the section
Line (Telnet) Interface Config Command Set on page 526 for information
on the subcommands found in this command set.
<line-number>
Specifies the starting Telnet or console session to configure for remote access
(valid range for console: 0; valid range for Telnet: 0 to 4).
If configuring a single Telnet session, enter the Telnet session number and
leave the <ending number> field blank.
<ending number>
*Optional
Specifies the last Telnet session to configure for remote access (valid range: 0
to 4).
To configure all available Telnet sessions, enter
line telnet 0 4
.
Default Values
By default, the ADTRAN OS line console parameters are configured as follows:
Data Rate: 9600
Data bits: 8
Stop bits:1
Parity Bits:0
No flow control
By default, there are no configured Telnet sessions.
Command Modes
(config)# Global Configuration Mode required
Command History
Release 1.1 Command was introduced
Vista de página 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 567 568

Comentários a estes Manuais

Sem comentários