ADTRAN Stub Routing Especificações descarregar pdf (Página 445)

100

101

Command Reference Guide Frame Relay Sub-Interface Config Command Set

interface using four hexadecimal bytes. For example, a virtual frame relay

interface labeled 1 would have a FR_PORT# of 00:00:00:01.

The Q.922 ADDRESS field is populated using the following:

Where the FECN, BECN, C/R, DE, and high order EA bits are assumed

to be 0 and the lower order extended address (EA) bit is set to 1.

The following list provides a few example DLCIs and associated Q.922 address:

DLCI (decimal) / Q.922 address (hex)

16 / 0x0401

50 / 0x0C21

60 / 0x0CC1

70 / 0x1061

80 / 0x1401

host-name

*Optional

“<string>”

By default, the hostname is the name configured using the Global Configuration

hostname

command.

Command Modes

(config-ppp 1)# Interface Configuration Mode required.

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), and

virtual frame relay sub-interfaces (fr 1.20)

Command History

Release 2.1 Command was introduced

Functional Notes

DHCP allows interfaces to acquire a dynamically assigned IP address from a configured DHCP server on the

network. Many Internet Service Providers (ISPs) require the use of DHCP when connecting to their services.

Using DHCP reduces the number of dedicated IP addresses the ISP must obtain. Consult your ISP to

determine the proper values for the

client-id

and

hostname

fields.

Default Values (Continued)

DLCI (high order)

DLCI (lower)

C/R

FECN BECN

876 5 4 3 2 1

1 2 ... 440 441 442 443 444 445 446 447 448 449 450 ... 567 568

Comentários a estes Manuais

Sem comentários

ADTRAN Stub Routing Especificações Página 445

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ADTRAN Stub Routing