ADTRAN Stub Routing Especificações descarregar pdf (Página 7)

100

101

Command Reference Guide CLI Introduction

REFERENCE GUIDE INTRODUCTION

If you are new to the ADTRAN Operating System’s Command Line Interface (CLI), take a few moments

to review the information provided in the section which follows (CLI Introduction).

If you are already familiar with the CLI and you need information on a specific command or group of

commands, proceed to Command Descriptions on page 13 of this guide.

CLI INTRODUCTION

This portion of the Command Reference Guide is designed to introduce you to the basic concepts and

strategies associated with using the ADTRAN Operating System’s Command Line Interface (CLI).

Accessing the CLI from your PC on page 7

Understanding Command Security Levels on page 8

Understanding Configuration Modes on page 9

Using CLI Shortcuts on page 10

Performing Common CLI Functions on page 11

Understanding CLI Error Messages on page 12

Accessing the CLI from your PC

All products using the ADTRAN OS are initially accessed by connecting a VT100 terminal (or terminal

emulator) to the

CONSOLE port located on the rear panel of the unit using a standard DB-9 (male) to DB-9

(female) serial cable. Configure the VT100 terminal or terminal emulation software to the following

settings:

• 9600 baud

• 8 data bits

• No parity

• 1 stop bit

• No flow control

For more details on connecting to your unit, refer to the Quick Start Guide located on the

NetVanta 3000 Series System Manual CD provided with your unit.

1 2 3 4 5 6 7 8 9 10 11 12 ... 567 568

Comentários a estes Manuais

Sem comentários

ADTRAN Stub Routing Especificações Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ADTRAN Stub Routing