ADTRAN Stub Routing Especificações descarregar pdf (Página 253)

100

101

Command Reference Guide DHCP Pool Command Set

network <address> [<subnet mask> or <prefix length>]

Use the network command to specify the subnet number and mask for an ADTRAN OS Dynamic Host

Configuration Protocol (DHCP) server address pool. Use the no form of this command to remove a

configured subnet.

Syntax Description

Specifies the IP address (in dotted decimal notation) of the DHCP address pool.

*Optional

Specifies the network mask (subnet) for the address pool.

If the subnet mask is left unspecified, the DHCP server uses the Class A, B, or C

natural mask.

*Optional

Alternately, the prefix length may be used to specify the number of bits that

comprise the network address. The prefix length must be preceded by a forward

slash ( / ). For example, to specify an IP address with a subnet mask of

255.255.0.0, enter

/16

after the address.

Default Values

By default, there are no configured DHCP address pools.

Command Modes

Any Configuration Mode

Command History

Release 2.1 Command was introduced

Usage Examples

The following examples show two different ways to configure an address pool subnet of

192.34.0.0

with a

16-bit subnet mask:

(config)#

ip dhcp-server pool MyPool

(config-dhcp)#

network 192.34.0.0 255.255.0.0

(config)#

ip dhcp-server pool MyPool

(config-dhcp)#

network 192.34.0.0 /16

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 567 568

Comentários a estes Manuais

Sem comentários

ADTRAN Stub Routing Especificações Página 253

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ADTRAN Stub Routing