ADTRAN Stub Routing Especificações descarregar pdf (Página 511)

100

101

Command Reference Guide Loopback Interface Configuration Command Set

ip route-cache

Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this

command to disable fast-cache switching and return to process switching mode.

Using Network Address Translation (NAT) or the ADTRAN OS firewall capabilities on an

interface requires process switching mode (using the no ip route-cache command).

Syntax Description

No subcommands.

Default Values

By default, fast-cache switching is enabled on all Ethernet and virtual frame relay sub-interfaces. IP

route-cache is disabled for all virtual PPP interfaces.

Command Modes

(config-interface)# Interface Configuration Mode required

Valid interfaces include: Ethernet (eth 0/1), virtual frame relay sub-interfaces

(fr 1.16), virtual PPP interfaces (ppp 1), and loopback interfaces.

Command History

Release 2.1 Command was introduced

Functional Notes

Fast switching allows an IP interface to provide optimum performance when processing IP traffic.

Usage Examples

The following example enables fast switching on the loopback interface:

(config)#

interface loopback 1

(config-loop 1)#

ip route-cache

1 2 ... 506 507 508 509 510 511 512 513 514 515 516 ... 567 568

Comentários a estes Manuais

Sem comentários

ADTRAN Stub Routing Especificações Página 511

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ADTRAN Stub Routing