ADTRAN Stub Routing Especificações descarregar pdf (Página 233)

100

101

Command Reference Guide Global Configuration Mode Command Set

snmp-server enable traps <trap type>

Use the snmp-server enable traps command to enable all Simple Network Management Protocol

(SNMP) traps available on your system or specified using the <trap type> option. Use multiple

snmp-server enable traps to enable multiple trap types. Use the no form of this command to disable traps

(or the specified traps).

Syntax Description

*Optional

Specifies the type of notification trap to enable. Leaving this option blank

enables ALL system traps.

snmp

Enables a subset of traps specified in RFC 1157

The following traps are supported:

coldStart

warmStart

linkUp

linkDown

authenticationFailure

Default Values

By default, there are no enabled traps.

Command Modes

(config)# Global Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example enables the SNMP traps:

(config)#

snmp-server enable traps snmp

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 567 568

Comentários a estes Manuais

Sem comentários

ADTRAN Stub Routing Especificações Página 233

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ADTRAN Stub Routing